Call 386-253-7627 To Report A Leak

How to Build an Air Conditioner Stand

Build an Air Conditioner Stand

Picture this: a serene summer’s day, and your home is an oasis of cool tranquility. But the calm is shattered every time the air conditioner rumbles into life with a jarring whine that shakes the peace like a clap of thunder. The solution? A custom-built air conditioner stand that promises to elevate both your unit and your living experience.

In this guide, tailored for the hands-on homeowner, we’ll walk you through the surprisingly simple process of creating an AC stand that not only lifts your unit off the ground but does so with style and durability.

Let’s talk everything AC stand fabrication in Smyrna Beach. Remember, you can contact experts in AC stand fabrication to save yourself the hassle! 

Tools and Materials Required

Before you begin, make sure you have the following essentials in your arsenal:

Tools You’ll Need:

  • Drill and bits
  • Circular saw or handsaw
  • Tape measure
  • Square
  • Clamps
  • Sander or sandpaper
  • Paintbrushes and a level


  • Pressure-treated lumber or cedar for outdoor use
  • 2-3 inch deck screws
  • Exterior wood glue
  • Rubberized adhesive or foam weather stripping
  • Paint or stain for finishing

Measurements for all lumber will depend on the size and weight of your AC unit, and the width of the stand will typically be a few inches wider and longer than the unit for stability.

Step-by-Step Guide

It’s time to consider how to build an air conditioner stand. Creating your air conditioner stand should resemble a dance more than a military march — each step flowing into the next with grace and precision.

Step 1. Design and Cut

Start by designing your stand. Decide on the height, take into account the recommended clearance of your AC unit, and sketch out the measurements. Once you’re satisfied, it’s time to make precision cuts. Remember, the more accurate your cuts, the better the fit and stability of your stand.

Step 2. Sand and Assemble

Run your hand along each cut board. If you feel a splinter, keep sanding. Next, begin assembling the frame, using exterior wood glue at the joints for added stability. Use clamps to hold the parts together, and employ screws to lock in the support.

Step 3. Stabilize and Finish

Once assembled, stabilize your creation. Make sure it’s level on the ground, and if there’s any wobble, add shims. For added protection, attach rubberized adhesive at the top where the AC unit will rest. Next, enhance your masterpiece with a splash of color or apply a coat of varnish to safeguard it against the elements.


You now know how to build a stand for an air conditioner. The culmination of your efforts is more than merely a stand; it represents a testament to your craftsmanship and serves as a protector of your home’s cool ambiance. Remember, an air conditioner stand represents the marriage of form and function. It should stand as an example of your DIY prowess, blending seamlessly with your home’s aesthetic while bearing the weight of comfort on its sturdy shoulders. With these straightforward steps, you can craft a sanctuary for your summer— not just the promise of cooler air, but the assurance that your tranquility is raised to new heights.