The roof is the jeweled crown of your abode. It needs timely care and attention. At times, to ensure that your home’s roof is in optimal condition, you need to get it repaired, and this may require roof measurement. Likewise, measuring the roof also becomes critical during bidding on a job or ordering materials. But, it goes without saying that climbing on a roof to get measures is a big hazard and also incredibly time-consuming. In such a case, it is possible to get a decent estimate of the roof’s footage from the ground. How does this become possible? Let’s find out!
How to Measure a Roof from the Ground
If you want to know how to measure a roof safely, the steps below can help –
Draw a Quick Diagram of the Property
Before measuring a roof from the ground, sketch a brief diagram of your property. It ensures that you do not accidentally miss a section and leave something out of your calculations. Besides, you also get the opportunity to record your measurements.
Measure the Footprint of the House
Step two is to compute the house’s footprint, which differs from its square footage. Former refers to ground-level outer wall perimeter. On the contrary, square footage encompasses the entire area of the house within the walls, including additional stories. Measure the length of each house side with a tape measure or wheel to calculate square footage. Make sure to measure all the way out to the roof overhang. Furthermore, remember to incorporate all the add-ons to your abode like garages, sunrooms, etc. Record your findings on the diagram.
Measure the Square Footage of Your Roof
Once you have all the measurements handy, you have to calculate the area. Multiply the length of a space by the width of the space to calculate the area of the rooms. But, more caution is required while calculating the roof’s footage. For instance, suppose your home has two 60-foot long sides, two 20-foot-wide sides, and a 20 x 10-foot back addition. To find the area of space, you can do the calculations below –
60 x 20 = 120 sq feet
10 x 10 = 100 feet
Add the spaces to determine the roof’s square footage.
Convert the Square Footage to Roofing Squares
The fourth step is to convert the square footage of your roof into roofing square sizes, which are common units of measurement in the roofing industry.
Measure the Slope of the Roof
Also, find the slope of the roof by using special tapes. This can be a challenging step, and opting for the assistance of a Daytona Beach roofer can be helpful.
If you need help with your roof at all, don’t be afraid to contact an expert because they have experience, knowledge, and all the equipment that we don’t have lying around to help with this task!