When your roof tiles are broken, it’s important to repair them as soon as possible. Not only is the damage unsightly, but it can also lead to water infiltration and other problems. Can you repair the damage alone or will you need an expert? In most cases, the best solution is the latter because you’ll have peace of mind that the job is done properly – experienced professionals know how to repair broken roof tiles in a heartbeat.
Causes of Broken Roof Tiles
Roof repair in Daytona Beach is an in-demand niche and this is because broken roof tiles are a common problem. But how do they occur? In many cases, it’s due to severe weather conditions such as high winds and hail storms. If a tile is loose or missing, it’s also more susceptible to breaking.
Improper installation can also lead to breakage; when tiles aren’t installed properly, they can become loose and fall off, leading to further damage. Furthermore, it could be a simple case of old age – over time, tiles can become cracked or brittle and eventually break.
How to Spot Broken Roof Tiles
Since repairing broken roof tiles is time-sensitive, how do you know if you have any? It’s actually not as difficult as you may think. If you notice any of the following, it’s time to give your roof a closer inspection:
- Granules from the tiles in your gutters
- Missing or cracked tiles
- Shingles that are curling or lifting
- Signs of water damage on your ceiling
If you suspect anything at all, take a closer look. Of course, you should also have regular roof inspections carried out by a professional to spot problems before they have a chance to develop – this is another opportunity to spot broken tiles.
Repair Broken Roof Tiles
Once you’ve located the broken tile, it’s time to repair it. If you’re to perform this yourself, start by removing any debris from the area around the break – this will give you a clear space to work in. Next, using a putty knife, apply a layer of roofing cement to the underside of the tile. If you’re using a sealant, apply this around the edges of the tile. Finally, place the tile back in its original position and press down firmly to seal it in place.
If you don’t do DIY and have little experience when it comes to roofing, it might be best to call in a professional. They will know exactly how to repair your broken roof tile, and will also be able to spot any other problems while on the roof. You’ll find many businesses available for roof repair in Daytona Beach, just make sure to do your research beforehand.
Depending on the damage, the specialist will recommend either fixing or replacing the tile. If the tile only has a small crack, then they will most likely just repair it with sealant. However, if the tile is extensively damaged or missing, then they will recommend replacing it. Replacing a roof tile is a lot more complicated than just sealant, so make sure you hire a professional if you lack experience in this area.
Once the tile is replaced, they will go over the entire roof to make sure that there are no other damaged tiles. It’s always better to catch these things early on, before they have a chance to cause further damage (to your home and your bank account!). With the right professional roofing company in Florida, you won’t have to worry about a thing!